Yale Libi™ Digital Deadbolt Keyed
With a user-friendly digital keypad, sleek modern design, and reliable quality, the Yale Libi™ Keyed Digital locks are the perfect choice for securing your home with ease and style.Unlock a new level of convenience and safety with our affordable yet feature-packed Yale Libi™ Keyed Digital locks.The Yale Libi™ Keyed Digital locks fit on most single bore hole standard preparation doors in New Zealand.The Yale Libi™ Keyed Digital locks are simple to install; in most cases it can be installed with just a screwdriver and the provided allen key.
Available as either a keyed lever deadlatch or keyed deadbolt lockset, in satin nickel or matt black finishes.
Features - 25mm latch hole and 54mm lock hole
- Suits 35mm to 45mm door thickness
- Ideal to retrofit existing mechanical lock to turn your entrance set into a digital solution in a couple of minutes with a screwdriver
- Touchscreen keypad
- Access via PIN code (4-10 digits only) or a mechanical key
- Mechanical key override (C4 keyway)
- Can be keyed alike to other ASSA ABLOY CYL4™ locks for one key convenience
- Unique pin code;70 PIN codes and 5 one-time user codes
- Backlight LED
- Auto-lock (default 30 seconds)
- The Yale Libi™ Keyed Digital lock is designed to fit both right and left-handed doors. To change the handing of your lock, please use the provided allen key and refer to the installation video or installation instructions for a detailed step-by-step guide.
- Not suitable for fire doors
- Deadlock latch function
- 4x AA battery powered (not included)
- IP Rating IPX4
- Supplied in display box
Programming
The programming menu allows you to set and delete user codes or one-time user codes, set programming codes, adjust auto-lock, sound settings and vacation mode.
To access the programming menu:
If you do not have a programming code set, press the programming button underneath the battery cover. You can use a small pin or the provided allen key to reach the reset button.
If you have enabled a programming code, enter the programming code then press the confirm button.
If you have lost your programming code it’s best to reset your lock back to factory settings by holding down the programming button for 5 seconds. You can use a small pin or the provided allen key to reach the reset button.
Auto-lock mode automatically locks your door after the set time. To adjust the time delay, press the programming button, then 8, then confirm button. If you’ve setup a programming code, instead of pressing the programming button, you will need to enter the programming code and then press the confirm button
Press 6, then the confirm button
Enter the keypad number that corresponds to your time delay preference (in seconds). The time delay can be between 1-99 seconds.
When Vacation Mode is enabled, all user codes are disabled. You can enable or disable this mode by pressing the programming button, then 8, then confirm button. If you have setup a programming code, instead of pressing the programming button, you will need to enter the programming code and then press the confirm button.If you have a programming code set up, you can use the programming code to access the programming menu to disable vacation mode from the outside.
Weather protection: Not designed for applications where exposed to weather.
The lock is designed for residential entry doors within sheltered applications where the lock exposure to outdoor elements is minimised. For homes located near the coast, we recommend installing your lock in areas less exposed to direct wind and salt spray. Positioning it under a sheltered porch or using a weather guard can help minimize direct exposure to the elements. To keep your lock in optimal condition, we advise occasionally wiping it with a damp cloth to remove any salt build-up. This will help maintain its appearance and long-term performance.
The Yale Libi™ Keyed Digital lock is powered with four AA battery.â¯If your battery runs flat, you will still be able to use your mechanical key to open the door. When the battery is low, the lock will sound 10 times and flash red 10 times on the keypad. To perform a factory reset on your unit, remove the battery cover and hold down the reset button for 5 seconds once you hear 3 long beeps. You can use a small pin or the provided allen key to reach the reset button.
Entry Codes must consist of 4 to 10 digits in length to register and up to 70 user codes can be saved. User codes must also be entered within 5 seconds (while the touchscreen is active) or the process will have to be restarted.
If you require assistance with your selection please contact us either by email or phone.
|
