Both the Heritage and KK vent range are plastic passive vents. The Heritage vent is a plastic foundation vent that is designed to replicate the same traditional aesthetics as a concrete vent. The Heritage vent can additionally be connected to two duct sizes 100 and 125mm ducts.
The KK vent is a surface mounted vent suitable to cover a hole or cavity to enable airflow.
Product features
Light weight and easy to install.
Won’t rust and durable.
The Heritage Vent designed to be recessed into an aperture in the foundation. The Heritage vet can be connected to ducting and accommodate two sizes- 100mm and 125mm duct
KK vent has four fluted vents which help repel rain while allowing ventilation.
Both vents can be painted over to match installation area.
Product application & installation
The Heritage and KK vent are designed to be installed in the foundation and wall cavities.
Allowing outside air to flow through, keeping your home dry, fresh and healthier.
KK vent will sit proudly on the surface to cover a hole, or cavity to enable air circulation. Use screws to secure the vent to the surface.
To install the Heritage vent, you apply silicone sealant on two opposite sides of the vent and insert vent into void to be filled. If required, you can use the template indentation to drill holes and secure with screws. No mortar required.
To connect ducting to the Heritage vent, check ducting fits over fins. Spread the silicon onto contact points, refit ducting over fins and use a cable tie to hod in place (not provided)
Relevant building code clauses
G4.3.1- Airflo vents supports the ventilation of a building subfloor area, allowing drier outside air to flow through the space,
removing the ground moisture and keeping it fresh, healthier and drier. objective to safeguard people from illness or loss of amenity due to lack of fresh air. This meets the standards NZS 4040:1990. If you require assistance with your selection please contact us either by email or phone. |
