The ECO ETS has a powerful electromotive drive that safely and silently opens and closes door leaves up to 250kg in weight, and up to 1600mm in width. This provides secure automation for external doors that may experience strong wind loads, and also for heavy fire protection doors.
Quiet and efficient
The ETS is extremely quiet and has a well engineered and harmonious movement. It is these properties that make the ETS such an effective all-rounder for public buildings,
hospitals, clinics and aged care facilities.
Fire and smoke protection
The ETS model ETS 64-R is approved as a hold-open device for fire and smoke protection doors. In combination with a lintel switch, it triggers the fire protection closer in the case
of a smoke activated alarm or power failure.
The Inverse function has been specially developed for smoke extraction from buildings. The fire/smoke protection function is reversed when the alarm is triggered, and the door is opened by spring force to enable smoke extraction.
The feature will still be activated during a power cut, so an emergency power supply is not necessary.
Simple assembly, operation and service The ETS has a simple, user-friendly settings menu. This is
controlled via the LCD display panel and joystick function on the control board.
Illuminated keys on the end caps allow easy access to the Auto/Night/Manual/Hold Open/Exit functions so that approved personnel can manage the device as required. The
operation of the device is also password protected.
Low Energy and Full Power settings
The ETS can be set for both Low Energy and Full Power functions on site using the same drive - an additional upgrade card is not necessary. The Full Power setting enables
automation for heavy doors that are used frequently and require fast opening and closing sequences.
The Low Energy setting (only 4W on standby) has been developed for private households, offices and work areas where doors are used less frequently.
The starting power and closing power are also adjustable for both Low Energy and Full Power settings, and there is an adjustable start delay setting for the closing sequence.
Wind load compensation
The wind load control is there to smooth the operation of the outer doors in different air pressure conditions right up to Wind Force 9. A briefly occurring increased wind load (e.g. a strong gust) is also recognised by the drive.
The control calculates the additional motor performance for amplifying or reducing the drive, enabling the door to operate effectively in a wide range of conditions.
Push + Go
Push + Go is a feature which if selected allows the door to automatically open when it detects users pushing the door manually. THESE DOOR OPERATORS ARE SUPPLIED AS 2 COMPONENTS BOTH BODY AND ARM ARE ORDERED SEPARATELY. If you require assistance with your ction please contact us either by email or phone. |  | Supplied With Fixings |  | Auto Swing Door Operator |  | Non Handed Door Closer |  | ECO ETS73 BODY
Maximum Door Width - 1600mm
Strength - 3 to 7 |  | Fire Rated Successfully tested on fire doorset to AS 1530.4 |  | Finish - Satin Stainless
Click To View Eco Schulte ETS Swing Door Operator Video FOR RELATED PRODUCTS REFER BOTTOM OF PAGE |
|
