APPLICATION
Lift-off facility for aluminium and timber doors.
SPECIFICATION
Alloy: High strength T.6 minimum tensile 254 mpa.
Pin Dia: 4.7mm 304 stainless steel with machined chamfers.
Bushes: Flanged nylon.
Knuckle: Round.
Aluminium Endcaps: Pressed-in interference fit.
Pin Length: 15mm.
Maximum Weight Capacity: 25 kg (turn over for further information)
INSTALLATION GUIDE ONLY
These hinges are designed to suit left and right hand installations making it easier for specifying.
The leaves are central on the knuckle with double countersinking.
Two of the screw holes in the leaf align with metal frame pattern.
The third hole will require drilling and tapping of the frame.
3 x 12mm x M5 metal screws are supplied for the metal frame.
When using a door closer, we recommend a minimum of 3 hinges be used, with the top hinge located as high as possible. For excessive usage, a fourth hinge may be required.
Standard Door: 2040 (h) x 820 (W)
For lift-off clearance, we recommend a 30mm gap, minimum at the top of the door.
Fastening screws supplied.
Pop rivets are not recommended.
If you require assistance with your selection please contact us either by email or phone. |
