INDENT BOBRICK B1658 MIRRORS SATIN STAINLESS

MATERIALS:
Frame — Type-430 stainless steel, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm) channel with bright polished finish for snap locking design;
1/2" x 1/2" x 1/2" (13 x 13 x 13mm) channel for "2S" Tab Design. One-piece frame with 90° mitered corners. Galvanized back has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from
pulling away from the wall. Double-sided tape secures mirror to concealed wall hanger.
Mirror — (B-1656 Series) Stretcher leveled stainless steel with reflective, highly polished strip finish. Tempered masonite backing (B-1658 Series) No. 1 quality, 1/4" (6mm) tempered select float glass: selected for silvering and electrolytically copper-plated by the galvanic process.
(B-1659 Series) 1/4" (6mm) thick. Two pieces of 1/8" (3mm) select float glass, selected for silvering and laminated with 0.015'' (0.381mm)thick clear vinyl in the center, and electrolytically copper-plated by the galvanic process.
Note: These reflective surfaces resist breakage and provide a measure of safety from broken glass, but differ in color and reflective quality from standard glass mirrors.
Backs of all glass mirrors are protected by full-size, shock-absorbing, water-resistant, nonabrasive, polyethylene padding.
Concealed Wall Hanger(s) — For snap locking design: Heavy gauge steel construction. Incorporates upper and lower members,which engage backplate louvers to keep mirror against the wall. For "2S"-Tab design: Incorporates upper bracket engaging in upper
louver and double sided tape below the bottom louver securing mirror to concealed wall hanger.
INSTALLATION:
Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure wall hanger with screws (not furnished). For other wall surfaces,
provide fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.

If you require assistance with your selection please contact us either by email or phone.

Available Finish - Polished Stainless

FOR RELATED PRODUCTS REFER BOTTOM OF PAGE